Processes, equipment, and materials

Laser Cutting

Fast, clean cuts in plate and sheet with tight nesting to keep your material cost down.

Specifications

• 6 kW fiber laser, 5 x 10 ft table
• Steel to 1 in, stainless to 0.75 in, aluminum to 0.5 in
• Cut tolerance to ±0.005 in
• Trumpf TruLaser 3030

Press Brake Forming

Accurate, repeatable bends on parts up to 12 feet, with tooling for tight radii and hemmed edges.

Specifications

• 250 ton capacity, 12 ft bed
• Angle tolerance to ±0.5 degrees
• Offline programming for complex parts
• Amada HFE press brakes (2)

Welding

MIG, TIG, and robotic welding by AWS-certified welders, with a Certified Welding Inspector on staff.

Specifications

• AWS D1.1 structural steel
• AWS D1.2 aluminum
• Robotic MIG cell for production
• Weld procedure specs on file

Tube and Pipe Fabrication

Cut, bent, coped, and welded tube and pipe for frames, railings, and structural assemblies.

Specifications

• Round, square, and rectangular tube
• Bending to 4 in diameter
• Coped and fitted joints
• Frames and weldments complete

Powder Coating

In-house powder line so your parts ship finished, with no extra handling or lead time.

Specifications

• 20 ft cure oven
• Standard and custom RAL colors
• Pretreatment wash and phosphate
• Batch and conveyor lines

Assembly and Hardware

Hardware insertion, sub-assembly, and finished units ready for your line.

Specifications

• PEM and self-clinching hardware
• Mechanical and bolted assembly
• Kitting and custom packaging
• Haeger insertion press